Eddy current sensor

MLW-33 series eddy current displacement sensor

Product description: MLW-33 series eddy current displacement sensor with long-term reliability, non-contact measurement, anti-interference ability, from oil and other media, the application of a wide range of simple struc
INQUIRY

A:□□□□ 探頭代號選擇:

33	代號	名稱	量程	安裝	螺紋規格	備注
	0101	Ф8英制探頭	2mm	標準	3/8-24	兼容BN21504、330101，PHILIPS6423/10
	0102	Ф8英制鎧裝探頭	2mm	標準	3/8-24	兼容BN21505、330102，PHILIPS6423/11
	0103	Ф8探頭	2mm	標準	M10×1	兼容BN22811、330103，PHILIPS6423/00
	0104	Ф8鎧裝探頭	2mm	標準	M10×1	兼容BN22810、330104，PHILIPS6423/01
	0105	Ф8英制反裝探頭	2mm	反裝	3/8-24	兼容BN21508、330105
	0106	Ф8反裝探頭	2mm	反裝	M10×1	兼容BN330106
	0107	Ф8特殊定制探頭	2mm	定制	定制	☆需提供詳細探頭尺寸規格
	0108	Ф8特殊定制鎧裝探頭	2mm	定制	定制	☆需提供詳細探頭尺寸規格

	0201	Ф11英制探頭	4mm	標準	1/2-20	兼容BN19048
	0202	Ф11英制鎧裝探頭	4mm	標準	1/2-20	兼容BN24798
	0203	Ф11探頭	4mm	標準	M14×1.5	兼容BN26179
	0204	Ф11鎧裝探頭	4mm	標準	M14×1.5	兼容BN26180
	0205	Ф11英制反裝探頭	4mm	反裝	3/8-24	兼容BN29766
	0206	Ф11英制探頭	4mm	標準	5/8-18	兼容BN81723 Ф14探頭
	0207	Ф11英制鎧裝探頭	4mm	標準	5/8-18	兼容BN83936 Ф14探頭
	0208	Ф11探頭	4mm	標準	M16×1.5	兼容BN81724 Ф14探頭
	0209	Ф11探頭	4mm	標準	M18×1.5	兼容PHILIPS6424/00
	0210	Ф11鎧裝探頭	4mm	標準	M18×1.5	兼容PHILIPS6424/01
	0211	Ф11特殊定制探頭	4mm	定制	定制	☆需提供詳細探頭尺寸規格
	0212	Ф11特殊定制鎧裝探頭	4mm	定制	定制	☆需提供詳細探頭尺寸規格

	0303	Ф25探頭	12.5mm	標準	M30×2	兼容BN27891
	0304	Ф25鎧裝探頭	12.5mm	標準	M30×2	兼容BN27891
	0311	Ф25特殊定制探頭	12.5mm	定制	定制	☆需提供詳細探頭尺寸規格
	0312	Ф25特殊定制鎧裝探頭	12.5mm	定制	定制	☆需提供詳細探頭尺寸規格
	0321	Ф25探頭	12.5mm	電纜后出	M30×2	一體化
	0322	Ф25鎧裝探頭	12.5mm	電纜后出	M30×2	一體化

	0401	Ф5探頭	2 mm	標準	M8×1
	0402	Ф5探頭	2 mm	標準	3/8-24
	0403	Ф5反裝探頭	2 mm	反裝	M8×1
	0404	Ф5反裝探頭	2 mm	反裝	3/8-24
	0405	Ф5探頭	2 mm	標準	1/4-28
	0406	Ф5探頭	2 mm	標準	M10×1.5
	0407	Ф5探頭	2 mm	定制
	0503	Ф16探頭	8 mm	標準	M22×1.5
	0504	Ф16鎧裝探頭	8 mm	標準	M22×1.5

B: □□□ Unthreaded length selection:

Metric thread probe with British thread probe

Minimum thread length 2mm 0 0 2 Minimum thread length 0.1 inch 0 1
Maximum thread length 250mm 2 5 0 Maximum thread length 9.8 inch 9 8
Increase the increment 1.0mm 0 0 1 Increase the increment 0.1 inch 0 1

C: □□ Shell length selection:

Housing Dimensions in Metric Dimensions Housing Dimensions in Imperial Dimensions

Minimum housing length 20mm 0 2 Minimum housing length 0.8 inch 0 8
Maximum housing length 250mm 2 5 Maximum housing length 9.8 inch 9 8
Increase the increment 10mm 0 1 Increase the increment 0.4inch 0 4

D: □□ Cable length selection:
0.5m 0 5 4.0m 4 0
1.0m 1 0 5.0m 5 0
2.0m 2 0 9.0m 9 0

E: □□ Connector Selection:

No high frequency plug 0 0
Provide high frequency plug 0 2

■ probe selection points
▲ Select the probe, it is recommended to select the range greater than 50% of the scope of the probe to move the probe
▲ If the measured surface area can not meet the minimum specimen size requirements, you can choose to expand the linear range of small probe
▲ If the probe cable without pipeline protection, it is recommended to choose armored probe, so that the cable is not easily damaged
▲ Without special installation restrictions, usually choose the type of standard probe
▲ Unthreaded probe is to facilitate the installation: the use of screw installation, the appropriate length of non-threaded screw can be screwed into the length of the need to reduce
▲ probe shell length depends on the installation location and the measured surface distance, unless otherwise special, it is recommended to choose 40mm or 50mm long
▲ When installing with screw hole, the probe cable should be 0.5m or 1.0m long. Optionally extend the cable, which will not easily break the cable when installing the rotary probe.
▲ install the probe inside the machine, the best overall length of the probe cable should ensure that the cable connector can be outside the machine, to prevent the internal oil pollution connector
▲ special specifications of the probe, please provide detailed size data or processing drawings

PREVIOUS：MLW-Y3300 series of integrated eddy current d NEXT：Eddy current displacement sensor